Product Introduction

1.1 Product physical map

image.png

1.2 Specifications of the whole machine

Input power

110～220VAC, 50/60Hz

Whole machine power consumption

15W

Operating temperature

0~45℃

Dimensions

432mm*272mm*54mm (without feet)

weight

3.6kg

1.3 HVT-13VP version video processor front panel hardware recognition and functional characteristics

image.png

The buttons on the front panel of the HVT-13VP video processor are divided into three areas, namely: MENU; INPUT; CONTROL. With 216*64 resolution blue LCD screen to display the entire menu system. The default status will be displayed on the LCD screen when the user starts the machine for the first time. By using the knobs and buttons to operate the menu system, users can conveniently and intuitively view or set the functions and status of the machine.

The following will combine the key functions and the display of the LCD screen to introduce you in detail the menu system of the 13V version of the video processor

1.3.1 Button description

Area description

Corresponding button

Function Description

MENU area

Touch the knob

Confirm key Same as: OK key

OK

Confirm key Same as: touch the knob to enter the menu, confirm, etc.

BACK

Back button, return to the previous menu,

Turn the knob counterclockwise

Used to select menu items and adjust parameters

Turn the knob clockwise

Used to select menu items and adjust parameters

INPUT area

DVI

DVI input port selection button

HDMI

HDMI input port selection button

DP

DP input port selection button

VGA

VGA input port selection button

SDI

SDI input port selection button (need to be customized to enable)

AV1

Composite video input port 1 selection key

AV2

Composite video input port 2 selection button

YP

Component video input port selection button

S

Bright color separation port selection button

MODE

Input source channel switch key, only valid in PIP mode

A mode: DVI, HDMI, DP, VGA, SDI... designated as the main window source

B mode: DVI, HDMI, DP, VGA, SDI... designated as the secondary window source

CONTROL area

PART

Window or full screen display state switching shortcut keys

1:1

Point to point (1:1), full, switch key

AUTO

Automatically adjust the phase; only valid for analog signals VGA, AV1, etc.

LOCK

Lock screen, unlock screen, switch key

PIP

Shortcut keys for PIP function switch

EFFECT

Single screen: Switching of special effects

In PIP state: switch the upper and lower positions of channel A and channel B.

1.3.2 LCD description

After turning on the power of the HVT-13VP version of the video processor, during the system startup process, the default startup interface will be displayed on the LCD screen on the left side of the front panel, as shown in the figure below after startup:

image.png

Window information

Show description

first row

Main window screen (default screen) input port name and current input signal resolution specifications

second line

The name of the input port of the secondary window screen and the current input signal resolution specification icon The secondary window is closed,

The third row

Icon Single-window display status, corresponding to the button "PIP", can be switched to: double-window display, PIP mode is on.

Icon Fill the input window into the output window, corresponding to the button "1:1", switch to: intercept the 1:1 corresponding value from the input source, and display it in the output window. The output window is not deformed or compressed.

Icon The screen is not locked, corresponding to the button "LOCK", switch to: screen lock

Icon Output full-screen display (display size is the set resolution value), correspondingly press "PART" to switch to the output window display (display size is the value set for output)

Icon: The source is switched to the main window value, the corresponding button "MODE" is switched to the source is switched to the sub-window value; the MODE switch is only valid in the PIP dual picture mode

Icon Single-window display status, corresponding to the button "PIP", can be switched to: double-window display, PIP mode is on.

Display value 255: current picture brightness value, enter the brightness menu of the receiving card settings, and turn the knob to adjust the brightness.

Fourth line

Output window value, press "PART" to display in full screen, switch between window display

The size of the full-screen display window is: current resolution value (menu->resolution setting set resolution size)

Window display window size: output set value (menu -> output settings, set output value)

1.3.3 Menu description

Customers can use the knob; the OK key (OK) and a return key (BACK) to select and adjust the items in the main menu. Touching the "knob" has the same function as the confirmation key. When the return key is pressed, the menu system will return to the previous menu one by one until it returns to the default state.

In the default state, press the "knob" or "OK" key, the menu system will enter the main menu state, and the LCD screen will display as shown below:

Picture quality adjustment

►

Output settings

►

Dual picture

►

Receiving card settings

►

Input resolution

►

Test chart

►

Menu language

►

The main menu is divided into seven sub-menu items. Rotate the "knob" to select the seven sub-menu titles listed above, after selection, press the "knob" or "OK" key to enter the selected item, and press the "BACK" key to return.

The functions included in the main menu are roughly as follows:

Picture quality adjustment

Image mode, contrast, color, color temperature, sharp

Output settings

Resolution setting, horizontal width, vertical height, horizontal position, vertical position

Dual picture

Dual screen, input source, transparency, top, horizontal width, vertical height, horizontal position, vertical position

Receiving card settings

Brightness, current gain, sending screen parameters

Input resolution

Horizontal resolution, vertical resolution, save settings

Test chart

Test chart

Menu language

Chinese, English

Picture quality adjustment submenu

Image mode

Divided into five options: "Normal", "Bright", "Movie", "Game", and "Sports"

Contrast

Range 0~100, default value 50

color

Range 0~100, default value 50

Color temperature

Range 0~100, default value 50

Sharp pair

Range 0~24, default value 12

Output setting submenu

Resolution setting

Custom, 1024*768 60HZ, 1280*768 60HZ, 1280*1024 60HZ, 1366*768 60HZ, 1920*1080 60HZ, 1920*1200 60HZ, 2048*1152 60HZ, 2560*900 60HZ, 2304*1024 60HZ select the corresponding Enter the resolution and press the "OK" button, turn on and off the machine again after 5s

Horizontal width

Output effective image width, the minimum value is 128 (generally set as the horizontal pixel value of the LED screen)

Vertical height

Output effective image height, the minimum value is 64 (generally set as the vertical pixel value of the LED screen)

horizontal position

The minimum value of the horizontal position of the output effective image relative to the origin is 0 (generally set as the pixel value of the horizontal position of the LED screen)

Vertical position

The minimum value of the vertical position of the output effective image relative to the origin is 0 (generally set as the vertical position pixel value of the LED screen)

For example: the current resolution is 1920X1080 (resolution can be changed), resolution width value=1920, resolution height value=1080

Constraint: horizontal width + horizontal position <= resolution width value;

Vertical height + vertical position <= resolution height value;

Dual picture sub menu

Dual picture

The dual picture function "on" and "off" are off by default

Input source

Select the input source of the sub-window (note the conflict, the sub-window will be given priority here)

transparency

Range 0~14, default value 0

Top

"0" main window is above the sub-window, "1" sub-window is above the main window

Horizontal width

The effective image width of the output secondary window, the minimum value is 128

Vertical height

The effective image height of the output secondary window, the minimum value is 64

horizontal position

The minimum value of the horizontal position relative to the origin of the effective image of the output secondary window is 0

Vertical position

The minimum value of the vertical position relative to the origin of the effective image of the output secondary window is 0

Constraints are the same as output settings;

Receiving card setting submenu

brightness

Range 1~255, the default value is 255

Current gain

Range 1~255, default value 127

Send screen parameters

"OK" to send, "BACK" to exit

Input resolution submenu

Horizontal resolution

Rotate the knob to adjust the resolution

Vertical resolution

Rotate the knob to adjust the resolution

Save Settings

"OK" to send, "BACK" to exit

Test chart submenu

Test chart

Divided into six options: "black", "original", "red", "green", "blue", and "cyan"

Menu language menu

Menu language

Chinese and English; select the corresponding language and press "OK" to confirm

1.4 HVT-13VP version video processor rear panel hardware recognition and functional characteristics

image.png

1.4.1 Port description

image.png

image.png

image.png

image.png